The digital remote control that came
packed with your TV is also capable of
controlling a compatible audio
component.
To program the remote just press the
AUDIO
button, then press the
button, then enter the two-digit code
number for your brand of audio
equipment.
Note:
Refer to the information sheet packed
with your remote control for the latest list of
brand names and code numbers. Because this
list of brand names is continually growing, the
information sheet packed with your remote
control may be a later version of this list and
contain additional brands and/or code numbers.
-Programming Remote to Control Audio Equipment
1. Refer to the chart below to find the
code number that corresponds to
the brand name of your audio
equipment. If more than one
number is listed, you may need to
try each one separately to find the
one that works.
2. Press the
AUDIO
button on remote
(depending on which button
you
want to program).
3. Press
button on remote.
4. Press two number buttons (first
one, then the other) to enter the
code number for your brand of
audio equipment.
Note: You
must press the two number
buttons within three seconds of
pressing the
button.
5. Point the remote at the audio
equipment and press the
OFF/ON
button to test the code number.
l
If the right number was entered,
the audio equipment will turn on.
l
If the audio equipment does not
react to the remote, repeat steps 1
thru 5 with another code number.
Operating Notes:
After the
AUDIO
button is programmed, the
buttons described below will operate the
basic functions of most audio equipment.
Depending on the age, brand, model, and
type of audio equipment, some models may
not be able to respond to all the function
buttons listed below. You will want to
experiment with each button to determine the
exact function for your component.
l
OFF/ON:
Press to turn on component.
Press again to turn off. Some components
will turn on automatically when you press
this button.
l
VOLUME:
Press to change volume level.
l
CHANNEL: Press
to select the next
higher or lower channel in the component’s
channel memory.
l
Number Buttons:
Press two numbers to
directly select a channel.
l
PLAY:
Press to start component playing.
l
PAUSE:
Press to pause play or record. To
release pause, press again.
l
STOP:
Press to stop whatever the
component is doing: playing, recording,
rewinding, etc.
. REWIND:
Press while component is
stopped to rewind tape.
l
FF (Fast Forward):
Press while
component is stopped to fast forward tape.
l
Press to start recording.
l
ANT (Antenna):
Performs various
functions depending on the type of
equipment. Experiment with this button.
Ads
AKAI
Dynamic Bass
F i s h e r
Kyocera
Mitsubishi
Nakamichi
Panasonic
Pioneer
R C A
Sansui
S h e r w o o d
Sony
Technics
Yamaha
03
29
38
42
03
49
52
07
25
32
36
39
45
46
T A P E
06
33.34
P H O N O
05
28
Summary of Contents for P52151WK
Page 1: ......
Page 43: ..._ _ _ _ _l __ __ _ _ I _ _ ...
