RCA P52151WK, Owner'S Manual

Page: 20 / 56

1.
Repeatedly press
MENU
to select
SETUP MENU
and then press + or to display the setup menu.
By setting
you
can
program
your TV to itself off
after a certain period of time. This is useful whenever you want to watch TV
for an hour or so before going to sleep. Press the + or button to select the
length of time you want the TV to stay on.
Details are on the next page.
You can program your TV to on and/or off at the times you choose by
setting
the ALARM
function.
Details are on page 20.
Because your TV has two separate antenna inputs on the back labeled
ANT A
and
ANT
you can connect two different signal sources, if desired.
By pr to change
the ANTENNA
function, you can switch back and
forth between the two signal sources. Each time you press the antenna
input will change.
Details are on page
LABEL
lets you program names (or labels) for the channel numbers.
The names you select will then appear on the screen whenever the channel
number is displayed.
Details are on page 22.
Repeatedly
press
MENU to
select
function,
then press
+ o r - t o
adjust it.
The
PARENTAL CONTROL
feature lets you lock out any channels that you
don’t want your children to watch. Pr or switches this function
from
OFF
to ON. When this function is set to ON, channels that have been
locked out with the
CHAN CTRL
function cannot be viewed. When this
function is set to all channels can be viewed.
Details are on page 23.
The
CHAN
(Channel Control) function works hand-in-hand with the
PARENTAL CONTROL
function. It lets you select the channels you want to
lock out. First select the channel number you want to lock out and then
press + to change this function from
NORMAL
to
LOCKED.
When the
PARENTAL CONTROL
function is set to ON, the channels you locked with
this function cannot be viewed.
Details are on page 23.
When you press
+
or to start the
AUTOPROGRAM
function, the TV will
automatically cycle through all channels and place the active channels for
your area in its channel memory. Pressing the
CHANNEL
up or down
buttons will then allow you to scan only active channels.
Details are on
page 24.
The
CHAN MEM
function allows you to erase and add channels to channel
memory as desired.
Details are on page 24.
The CABLE/AIR
function tells your TV whether you have a cable-TV system
or a home antenna connected to the TV Your TV is so automatic that
will probably never need to change this function. When your TV
autoprograms, it automatically adjusts
the
setting for
you. If
you should ever need to override the automatic setting, press + or to
change it.
The
VCR
I
CHAN
function lets you program to which channel the TV will
automatically tune when you press the
VCR
I button on the remote.
Details are on page 25.
The
VCR
2
CHAN
function lets you program to which channel the TV will
automatically tune when you press the
VCR
2 button on the remote.
The setup menu will automatically disappear
from the screen if you do not press + or
within a few seconds.
The CABLE CHAN
function lets you program to which channel the TV will
automatically tune when
you
press the
CABLE
button on the remote.
Details are on page 26.
Via remote control, your TV will “remember”
which function you displayed last-even after the
menu has disappeared from the screen. So, if you
want to adjust the same function again, simply
press the + or button on the remote control.
The last function you adjusted will appear on the
TV screen.
18
After you set the clock, you will be able to see the on-screen time display
whenever you change channels or press the
DISPLAY
or TV button on the
remote control. To set the clock when this function is selected, first press
and hold to set the correct hour (including AM and PM). Then press and
hold + to set the correct minutes.
The
DEMO
function lets you activate your TV to automatically display a
variety of its on-screen menus and special features. When this display is
selected, you can start auto demo by pressing the + button on the front of the
TV. The demo will continue until you stop it by pressing any button on the
front of the TV other than
VOL
up. The remote control is not
while the TV is in the auto demo mode.