RCA 25825 User Manual Download Page 42 | Manualshive

Page: 42 / 60

background image

Switching Between the Speakerphone, Handset, and Headset

To switch to the speakerphone, press SPEAKER. The speakerphone indicator turns on. Put
handset back in cradle.

To switch to the headset, press the HEADSET button to enable the headset, and the headset
indicator turns on. Hang up the handset.

Mute

the line cannot hear you, but you can still hear them.
1. Press MUTE to activate the mute feature. The mute indicator turns on.

NOTE: Switching from speakerphone to handset cancels mute.

Do Not Disturb

This feature is set at individual telephones to disable (silence) an incoming ring signal, inter-

42

com ring, or page. When there is an incoming call or an intercom call, the status indicators
function as normal but the phone will not ring.
1. When the unit is idle, press the DND softkey the last setting is displayed.
2. Use the VOL (+ or -) buttons to scroll up or down to select the duration. You may choose
from 15 minutes, 30 minutes, 45 minutes, 1 hour, or 2 hours and increase the duration by 1
hour intervals up to 24 hours.

abled.

NOTE: If Intercom Auto Answer is turned ON, the unit automatically answers the intercom
call even if the Do Not Disturb function is activated.

Hold
Placing a Call on Hold

Press the HOLD button to put the line in use on hold. The line indicator for the line on hold

the indicator shows in red.

Note: The hold music will be heard at the far end user during hold mode.

«
...
40
41
42
43
44
...
»

Summary of Contents for 25825





























































Reviews:

No comments

Related manuals for 25825

Brand: Panasonic Pages: 8

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 2

Brand: Swyx Pages: 4

Brand: Agent Headsets Pages: 1

Brand: Uniden Pages: 48

Brand: Clarke Pages: 16

Brand: Sagem Pages: 64

Brand: AEI COMMUNICATIONS Pages: 3

Siedle Steel STLM/TK 611-02

Brand: SSS Siedle Pages: 12

Brand: LG-Ericsson Pages: 512

AIDE MEMOIRE M7455

Brand: Aastra Pages: 2

Brand: IPRO Pages: 12

Brand: SpectraLink Pages: 18

Commander N1236

Brand: Telecom Australia Pages: 203

Brand: Telstra Pages: 27

Brand: VTech Pages: 51

Brand: VTech Pages: 34

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands