RCA 25825 User Manual Download Page 3

Page: 3 / 60

you the opportunity to correct the situation; and (3) inform you of your right to bring a

complaint to the Commission pursuant to procedures set forth in Subpart E of Part 68,

FCC Rules and Regulations.

The telephone company may make changes in its communications facilities, equipment,

operations or procedures where such action is required in the operation of its business

and not inconsistent with FCC Rules and Regulations. If these changes are expected to

must give you adequate notice, in writing, to allow you to maintain uninterrupted

service.

Interference Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference; and (2) This device

must accept any interference received, including interference that may cause undesired

operation.
This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reason-

able protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation.
If this equipment does cause harmful interference to radio or television reception, which

correct the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna (that is, the antenna for radio or television

that is “receiving” the interference).

•

Reorient or relocate and increase the separation between the telecommunications

equipment and receiving antenna.

that to which the receiving antenna is connected.

If these measures do not eliminate the interference, please consult your dealer or an experi-

enced radio/television technician for additional suggestions. Also, the Federal Communica-

tions Commission has prepared a helpful booklet, “How To Identify and Resolve Radio/TV

Washington, D.C. 20402. Please specify stock number 004-000-00345-4 when ordering

copies.

compliance could void the user’s authority to operate the equipment.

Warning

Summary of Contents for 25825





























































Search results

Summary of Contents for 25825

Reviews:

Related manuals for 25825

Brands by name

Popular brands

RCA 25825, User Manual

Search results

Summary of Contents for 25825

Reviews:

Related manuals for 25825

Brands by name

Popular brands