RBCBioscience MagCore HF16 Plus, Training Manual

Page: 31 / 96

30
RBCBioscience
Open the cover of the printer and take out the
thermal paper tube running out of thermal paper.
Put the new thermal paper into machine according
to the direction shown as the following figure and
then close the cover of the printer.
If the position of the thermal paper roll is not
correct, the red/yellow lamp will blink. Please
press the Feed button to confirm the installation is
finished.
━ Replace thermal paper ━ Replace fuse
250V 5A
Please use the specific fuse. If you
use the fuse with higher specification
in the machine, it may be burned.
You can purchase the Cat. No.: MSP005 Thermal Paper from
the local distributor.