Installation and Service manual
Compass STD 22
Compass STD 22 Compact
140
Edition: Sept. 13, 2005
3646/110--233.DOC010302
Serial
No.
Comments, Information
Indications
8
Set the speed source for SEC
(STD22 Compact only)
This setting is used to select the source of the speed information for
automatic Speed Error Correction.
PLoG =
Pulse Log
PLd-- =
Puls Log (polarity of the input interface inverted)
PLd
=
Puls Log (polarity of the input interface not inverted)
uhu.
=
NMEA Log (means water speed in general)
ubu.u =
means NMEA Log specified with speed through the water
ubu.G =
means NMEA Log specified with speed over ground
GLoG =
GPS--receiver speed
The indications in the flashing display are selected.
If the setting does not correspond to the connected device, the course
correction relay responds and gives an appropriate warning only to devices
which are connected to this alarm output.
Switch B 37 (DIP switch)
1 2 3 4 5 6 7 8
OPEN
B38
2X
B39
1X
B38
1X
B39
1X
