Compass
STD 22
Installation and Service manual
Compass STD 22
79
Edition: May 20, 2005
3646/110--233.DOC010302
3.3
Installing the compass and putting it into operation
3.3.1
Remove the transportation support with outer sphere, supporting liquid
and distilled water.
-- Undo the 4 screws (Figure 41 /1) at the top and bottom of the enclosure door,
lift out the door and detach the earthing strip (Figure 41/2)
on the inside of the door.
-- Carefully remove the transport packaging with the outer sphere and the two bottles
containing supporting liquid and distilled water from the compass enclosure.
-- Take the outer sphere out of the transport packaging and place it on the
base plate; the outer sphere must be secured to prevent it from tilting
Caution:
Danger of tilting!
1
1
2
Figure 41
: Principle of dismantling the enclosure door
