-9-
Installation
TellPhone 5000
Installation
Finding out preconditions
Vehicle
This hands-free kit must only be operated in vehicles with a 12 V DC battery,
minus connected to earth. Without a built-in car radio you need an auxiliary
loudspeaker.
Phone
You need a compatible Bluetooth
®
phone to use this system.
Muting
This facility automatically mutes the car radio when you receive or make a call.
This hands-free car kit supports the muting of the car radio. Please check in the
information on your car radio whether it provides a radio mute connection.
Auxiliary loudspeaker / Car radio’s telephone connection
The change-over of the sound from the car radio speakers to the hands-free car
kit loudspeaker is achieved by switches which support a maximum power
output of 35 W (sinus). A power output which exceeds 35 W will reduce the
durability of the switches. If you need a higher power output either the car
radio’s telephone connection or use 5 W / 4 Ohms auxiliary loudspeakers .
Preparing the tools
You need:
•
crosstip screwdriver PH 1 x 80
•
universal pliers
•
side cutting pliers
•
hand drill with 2,0 mm drill
•
vehicle specific tools for removing possible coverings
•
radio removing tools
•
4-10 cable bonds
•
approx. 1 m binding wire in order to rout cables under the car’s trim
•
degreasing agent such as spirit (see
“Mounting the microphone”
)
Improper Installation
Improper installation may cause damages to the unit or to the
vehicle! The installation of the hands-free car kit requires special
knowledge and special abilities.
We therefore recommend to
have the installation done by a professional.
Summary of Contents for TellPhone 5000
Page 18: ...18 TellPhone 5000...
