-17-
Installation
TellPhone 5000
Connecting the components to the electronics box
The individual components are connected to the electronics box as follows:
•
Insert the microphone coupler
➀
into the jack bush with the microphone
symbol
•
Insert the display cable
➁
into one of the two jacks until it locks in place
•
Inset the connection cable set
➂
to the electronics box.
Test for Correct Functioning
The test for correct functioning is only possible when the system has been
connected to a compatible Bluetooth
®
phone. Please refer to the relevant
section further on in this manual to find out how to proceed.
1
2
3
Summary of Contents for TellPhone 5000
Page 18: ...18 TellPhone 5000...
