-13-
Installation
TellPhone 5000
•
Using the adhesive strip, on a flat and as vertical a surface as possible.
However, it will not be possible to realign the display later. This type has
the lowest assembled height
•
Using the ball joint, also on as vertical a surface as possible. The
advantage of this type is that the display can be realigned later at any time.
The required sticking area is also smaller, although the display does
protrude further into the vehicle's interior
•
The base can be used to mount the display within the driver's field of
vision. This type is preferable because, in order to read it, the driver turns
his gaze away from events on the road less than with the other types. The
base can either be stuck down or screwed in
Find the installation position that suits you best. Sit behind the steering wheel
as normal and find a position in which you can see the display well at all times.
You should be able to view the display at right angles, otherwise you will need
to account for troublesome reflections or glare.
Now check that the cable length is sufficient for the position you have selected.
It is essential that the cable is installed neatly. If the cable reaches the
electronics box without a problem, you can attach the display.
Option 1: Sticking
Adhesive surfaces must be free of grease and dust. Clean the designated
surface with a suitable detergent such as spirits. Only use detergents which do
not dissolve plastics or varnished wooden surfaces and which are not greasing
themselves. Unsuitable agents are e.g. cleaning grade petrol, acetone,
turpentine, trichloroethylene and similar detergents.
Remove the protective film from the adhesive strip. Hold the display, the ball
joint or the display base a few millimetres above the required mounting position.
Check the position again. Once the part is stuck down, it will not be possible to
correct it later. Place the part onto the adhesive surface and briefly apply
moderate pressure.
Summary of Contents for TellPhone 5000
Page 18: ...18 TellPhone 5000...
