-11-
Installation
TellPhone 5000
Check cable lengths
Before you cradle the components permanently, check if you have selected the
mounting locations so that the cable lengths are long enough to connect the
individual parts with each other. Observe the following pointers when deciding
on the installation locations:
Unsuitable places for the microphone:
•
close to the speaker (less than 80 cm away)
•
under the dashboard
•
in the current of air from the window or ventilator
Suitable places for the microphone:
•
when the sound of the voice can strike the microphone without hindrance, the
distance between the speaker and the microphone should be approx. 35 cm
•
on the A-pillar (between front and side window panes)
•
beside the driver’s sun visor
•
on the dashboard
•
on the steering column
Unsuitable places for control unit:
•
Airbag’s action area
•
anywhere where there is a possibility of the head being struck
•
outside the driver’s reach
Suitable places for control unit:
•
central console between driver and passenger
•
On the dashboard, at a point within easy reach of the driver
Mounting the electronics box
Specialised dealers provide built-in consoles for a range of passenger cars. They
can accommodate all elements in the unit, including the electronics box. If you
are not using a built-in console, proceed as follows:
Decide on where to mount it
Ensure that there is approx. 70 mm space free for
the plug-in connectors. Mark the screw positions
and pilot bore the holes with a 2-mm drill.
Installing the electronics box
Use the four metal drive screws with the
appertaining washers from the set of screws
included in the scope of supply to affix the
electronics box.
Summary of Contents for TellPhone 5000
Page 18: ...18 TellPhone 5000...
