-31-
Putting into operation for the first time
TellPhone 5000
successful, the system automatically connects to this telephone.
However, if the search is still unsuccessful, the system switches to user
management. This means it is possible to connect manually to a
telephone stored within the user profile.
•
In user management you can also select a profile which is assigned to a
paired telephone. Pressing the green button prompts TellPhone 5000 to
establish a connection to this telephone. A precondition for establishing a
connection is:
•
The telephone must be in range (typ. < 10 m).
•
Another Bluetooth
®
connection must not already be
present.
•
Both partners must still have the passkey that was
agreed when they were paired.
A connection is generally maintained until it is explicitly disconnected by one of
the devices or until it breaks down because the range is constantly exceeded.
In the headset profile, many telephones hang up the Bluetooth
®
connection
after every audio connection. In this case you will need to restore the
connection before using the dialling functions on TellPhone 5000. The
connection is restored after a few seconds.
The first time a connection is established, TellPhone 5000 tries to load the
phonebook from the connected mobile phone. Under some circumstances this
may take some time if it contains a large number of entries. A progress bar
indicates the status of this process. During this time you cannot use
Audio com's handsfree functions. Once the synchronisation of the phonebook
is complete, you can use the rotary encoder to scroll through it.
Making a call
After you paired your mobile phone with the TellPhone 5000 via Bluetooth, you
are able to make phone calls. You can dial a number by voice dialling, by dialling
on the telephone or directly from the phonebook.
Incoming call
The call is announced via your telephone's ringtone if the telephone makes it
available via the Bluetooth
®
connection. If not, a signal tone will be generated
in TellPhone 5000.
Provided the caller has not blocked the transmission of his number and the
telephone supports this function, the display on the control unit will show the
caller's number or, if a corresponding entry is found in the phonebook, the caller's
name. You can decide whether to accept the call (green button) or reject it (red
button). If you accept the call, you can adjust the volume via the rotary encoder.
The setting will remain stored. You can end the call by pressing the red button.
Summary of Contents for TellPhone 5000
Page 18: ...18 TellPhone 5000...
