-20-
TellPhone 5000
Display and control elements
TellPhone 5000 supports the Bluetooth
®
, headset and handsfree profile. In
other words, you can use it to operate telephones that support the Bluetooth
®
headset profile or the Bluetooth
®
handsfree profile. If necessary, please refer
to the operating manual that came with your mobile phone for details of which
profile it supports.
Please visit the Internet home page to find the information you require on
compatible mobile phones.
Display and control elements
TellPhone 5000 is operated using an offset display and a wireless control unit:
Display
The display shows messages from TellPhone 5000
plus information entered by the user. If the system is
ready for operation, the display will show the name of
the network provider, the name of the user and the
network field strength. If a telephone is connected via
Bluetooth, its name will also be displayed along with
other information, depending on the telephone.
Hereafter this state will be defined as the main screen.
Control unit
The control unit has two buttons plus a rotary encoder
with pushbutton function.
The rotary encoder (left, right) is used to adjust the volume
during a conversation and to scroll through the menus.
When the main screen is displayed, briefly pressing the
rotary encoder will open up the main menu. Within the
menu it can be used to select an entry and open a corresponding submenu.
Pressing down the rotary encoder for longer starts the voice dialog. Pressing
any key ends the voice dialog. Further information on voice control of the
TellPhone 5000 can be found in the chapter entitled “Voice control”.
The red and green buttons are used to accept or reject an incoming call.
Additional functions of the green button:
In the main screen:
Calls up the list of previously dialled numbers.
In the phonebook and call registers:
Dialling status of the number currently selected.
Summary of Contents for TellPhone 5000
Page 18: ...18 TellPhone 5000...
