RayTek MI3, Operating Instructions Manual

Page: 83 / 119

Profibus
MI3
Rev. F1 05/2013
83
14.2 Programming
14.2.1 Parameter Data
Byte Address
without
offset
Description Format Range
0 to 6 Fix
7 DP-V1 Status1
8 DP-V1 Status2
9 DP-V1 Status3
10 3 Temp. unit 67=°C, 70=°F 67 or 70
11 4 Reserved
12, 13 5 Bottom temp. of output 1 in 0.1°C /°F
14, 15 7 Top temp. of output 1 in 0.1°C /°F
16, 17 9 Bottom temp. of output 2 in 0.1°C /°F
18, 19 11 Top temp. of output 2 in 0.1°C /°F
20 13 Source (head) for output-1 head number 1…8
21 14 Type of source for output-1 73 = I (internal temp.)
84 = T (object temp.)
73 or 84
22 15 Analog output mode 1 5 = TCJ
6 = TCK
7 = TCR
8 = TCS
9 = 0…5V
10 = 0…10V
99 = tristate (disabled)
5…10, 99
default: 9
23 16 Source (head) for output-2 head number 1…8
24 17 Type of source for output-2 73 = I (internal temp.),
84 = T (object temp.)
73 or 84
25 18 Analog output mode 2 0 = 0…20mA
4 = 4…20mA
9 = 0…5V
10 = 0…10V
99 = tristate (disabled)
0, 4, 9, 10, 99
default: 4
26…39 reserved
40…43 reserved
44, 45 37 Emissivity Head_1 * 1000 (0.9

900) 100 … 1100
46, 47 39 Transmissivity Head_1 * 1000 (1.0

1000) 100 … 1000
48, 49 41 Averaging time Head_1 * 0.1s (1s

10) 0 …9990
50, 51 43 Peak hold time Head_1 * 0.1s (1s

10) 0 …9990
52, 53 45 Valley hold time Head_1 * 0.1s (1s

10) 0 …9990
54, 55 47 Ambient temp. Head_1 in °C /°F dev. range min..
max
56, 57 49 Setpoint relay Head_1 in °C /°F dev. range min..
max
58 51 Relay alarm output control Head_1 0 = off
1 = target temp.
2 = internal temp.
0, 1 or 2
1.800.868.7495 info@Raytek-Direct.ca