Raytech TraceTek TTDM-128, User Manual

Page: 5 / 47

H56874 4/03 www.tycothermal.com +1 (650) 474-7400 5
TTDM-128
User Manual
READ BEFORE USE
Please read these instructions carefully and keep them in a safe place (preferably close to
the module) for future reference. The instructions provided in this booklet must be followed
carefully to ensure proper operation. If the equipment is used in a manner not specifi
ed by
the manufacturer, the protection provided by the equipment may be impaired.
System Configurations
The TraceTek TTDM-128 module has many possible applications and configurations. The
TTDM-128 can be configured as a stand-alone leak detection panel, or it can be used in
a network of other TraceTek leak detection modules, such as the TTSIM sensor interface
module, the TT-NRM network relay module, or additional TTDM modules. In all cases,
each TTDM-128 offers the following features and capabilities:
§
Directly monitor the equivalent of up to 1500 m (5000 ft) of TraceTek sensor cable and
point sensors
§
1024 event memory
§
Built-in status and alarm relays
§
Optional 4-20 mA output
TTDM-128 SINGLE CHANNEL STAND ALONE SYSTEM
(See Quick Setup on page 8)
§
TTDM-128 with up to 1500 m (5000 ft) of TraceTek
sensor cable, or a combination of sensor cable and
point sensors
SINGLE CHANNEL WITH REMOTE REPEATER
(See Quick Setup on page 8)
§
Stand-alone system with additional
TTDM-128 acting as a remote display
§
Remote panel mimics all conditions
at the primary panel
§
Primary panel acts the same as a
stand-alone TTDM-128 system
§
Modbus interface to a host computer is
only available at the remote TTDM
Twisted
pair
#2
#1
Overview