Raytec Americas:
+1 613 270 9990 • [email protected]
Raytec Ltd reserve the right to change specifications without prior notification or public announcement.
Version 1
www.raytecled.com
1277-D
-0008
Installation Steps
Surge Suppressor Kit
Step 1.
Step 2.
Step 5.
Step 3.
Step 4.
This SPX-BKT-XR-SP-AC kit is intended for use with UL Listed XR luminaire as marked on the luminaire nameplate.
Accessory Package Contents
(Requires SPX-BKT-XR-SP-AC Surge Protector Accessory Kit)
Inspect shipping package and contents to ensure no damage has occurred during
shipping.
Open XR Wiring Cover with 7mm hex socket driver. Allow Lens to hang via retention
strap.
NOTE: Screws are captive fasteners and will remain attached to the Lens for ease of
reinstall and prevent loss of fasteners.
Close XR Wiring Cover. Ensure the retention cable is not pinched between XR Head
and the XR Wiring Cover. Tighten lens bolts using a 7mm socket or box wrench to 1.7
N-m (15 in-lbs).
Install provided double-sided tape along side of surge protector and secure
to XR body near AC input. Secure the surge protector and driver lead wires
together as close to the origin of the driver lead wires as possible using the
provided zip tie.
Wire according to wiring instructions on Page 13-14. Refer to NEC/CEC codes and
follow all applicable local standards.
SPX-BKT-XR-SP-AC
QTY
PART NAME
1
BSP3-277-20KA SURGE PROTECTOR
1
3M VHB TAPE
1
4" Zip Tie
SURGE PROTECTOR LOCATION
SPZ-XR
