Raytec Americas:
+1 613 270 9990 • [email protected]
Raytec Ltd reserve the right to change specifications without prior notification or public announcement.
Version 1
www.raytecled.com
1277-D
-0008
Installation Steps
Conduit Mount Installation
Step 1.
Step 2.
Step 3.
Step 4.
This SPX-BKT-R-CC kit is intended for use with UL Listed XR luminaire
as marked on the luminaire nameplate.
Accessory Package Contents
This kit contains Anti-Rotation-Lock
(1004-01-02-201)
Refer to alternate instructions if using Wall, Hook, Pole or Yoke Mount
Inspect shipping package and contents to ensure no damage has occurred during
shipping.
When using the R-CC anti-rotation lock, slide it first onto suitably mounted hanging
conduit or luminaire hanger loosley tighten set screw.
Fixed Rigid Metal Conduit or luminaire hanger must be suitably mounted to prevent
rotation and system must be rated for 110 lbs. Install luminaire onto ¾” NPT threaded
nipple. Tighten to hand tight contact plus 1 to 2 turns. When using the R-CC losen
set screw and slide R-CC into place with flats aligned to those on luminaire hub and
tighten set screw to lock unit in place.
NOTE: To aid in assembly and provide protection against ingress, use of a petrolatum
or soap thickened mineral oil based thread lubricant/sealant is necessary.
Un-used conduit opening must be plugged to maintain the integrity of the enclosure.
Install Secondary Safety Cable by looping appropriate steel cable or chain through
the outer band of the unit and fastening a closed loop. Secondary safety hardware
must be rated for a minimum of 110lbs.
Install remaining loop of secondary safety chain or steel cable to suitable mounting
location and fasten securely. Secondary safety hardware must be rated for 110lbs.
Resume installation instructions provided with luminaire. (STEP 4 in XR Installation
Instructions from the Surface/Ceiling Mount installation provided with Luminaire).
Step 2
Step 4
SPX-BKT-R-CC
QTY
PART NAME
1
ANTI-ROTATION BRACKET ASSEMBLY
SPZ-XR
