HPL Series LEDExplosion Protected Luminaire
Operating Instructions
IM0217
Version 5
05/2017
Page 1: ...HPL Series LED Explosion Protected Luminaire Operating Instructions IM0217 Version 5 05 2017 ...
Page 2: ...elated to a layers above 5 mm thickness Do not install where the marked operating temperature exceed the ignition temperature of the hazardous atmosphere Do not operate in ambient temperatures above those indicated on the luminaire nameplate The luminaires shall be operated as intended and only in undamaged and perfect conditions And Keep tightly closed when in operation The technical data indicat...
Page 3: ...ctrical connection The opening of luminaire always shall be without voltage All gasket seals must be clean and undamaged before closing the luminaire Make sure the luminaires is well closed before operation The Driver Inverter housing is Exd type of protection with cylinder joint The LED arrays is encapsulated in the Lens sealed with compound to make an Exm type of protection Make sure the type of...
Page 4: ...xplosive atmosphere when opening the equipment See section 8 4 for notes on opening and closing the lamp Battery pack replacement In the case of battery failure the battery pack must be replaced as a complete unit from the manufacturer First open the cover then change the failure battery last close the cover Only use original spare parts If the luminaire was previously in operation then wait to co...
