7
Wiring
The illuminator is supplied with a terminated CAT 5 cable with a waterproof Ethernet
connector (supplied loose i.e. not fitted) and an auxiliary multi-core cable.
Network Connections
Ensure you make a waterproof connection to the RJ45 as shown below. Ensure the
connector is waterproof and sealed after the connection is made.
To illuminator RJ45-RJ45 connector To Network
24V DC PSU
Connect
24V DC
to the red (+ve) and black (-ve) cables of the auxiliary cable.
Ethernet cable is a data connection only.
Connect external input trigger and external output as required
–
see table below:
Colour
Description
Wire Gauge (AWG)
Orange
External Input -Volt free or TTL +ve
22
Purple
External Input -Volt free or TTL GND
22
Yellow
External Output
–
Volt free
22
White
External Output - Volt free
22
WARNING
:
To maintain the IP rating of the product the multi-core auxiliary cable
must be waterproofed and terminated appropriately even if it is not in use.
