18
Page Name
Functions available
Home Page
Allows manual control of an individual illuminator or
group of illuminators including power adjustment, boost
and deterrent controls. Select override to operate above
functions.
Settings / Groups
Allows detailed set-up and configuration of the
illuminator including how it responds to Photocell and
External Inputs, duration on period, power levels, soft
start, response to group commands, deterrent patterns
and speeds. Allows illuminators to be allocated to a group
or to create a new group. Selectable control of illuminator
either locally, by VMS or HTTP commands.
Adv. Settings
Allows for further detailed setup of External Input,
External Output, Photocell sensitivity level and duration of
Override.
Access
Change passwords
Network
Allocate IP address and other network settings, select
DHCP operation, allocate illuminator name
System Information
Indicates basic information about the illuminator. Ability
to restore factory settings or restart illuminator.
Diagnostics
Basic diagnostics to enable 1
st
level troubleshooting
Adv. Diagnostics
Advanced diagnostics to enable 2
nd
level troubleshooting
Software Update
Indicates current software / firmware version. Ability to
upload updated software / firmware version.
Log Off
We recommend logging off illuminator after every session
