6
STEP 4:
Change IP address and connect to the illuminator (Pg. 9)
All VARIO2 IP have the same default IP address and this must be changed
immediately to avoid any potential conflicts or communication errors.
We recommend the easiest and fastest way to identify and connect to illuminators is
using the Raytec Discovery Tool where the IP address can be altered or DHCP
enabled.
Alternatively, type the IP address of illuminator into a web browser
–
default is
192.168.2.80
–
and use the web interface to manually alter IP address.
IMPORTANT:
We recommend Raytec Discovery Tool as the easiest way to establish communication. If
using IP address for direct communication, illuminator and computer must be in same
network range.
STEP 5:
Illuminator Set-Up (Pg. 12)
Raytec Discovery Tool Basics
Log-in, Security & Basic Illuminator Setup
Basic Web Page Functionality
STEP 6:
Basic Troubleshoot (Pg. 19)
Full, detailed instructions begin on page 21
