RayTalk RB-130, User Manual

Page: 6 / 31

2.2 Remote Wireless Router-to-Central Wireless
Bridge
1. Set the Central RB as a bridge ( bridge IP address is 192.168.2.1 ).
2. Set Wireless parameters on Central RB: Channel ( 1 ) and SSID
( wireless ).
3. Set the Remote RB as a Router ( Wireless Interface IP is 192.168.2.2,
Ethernet Interface IP is 192.168.10.1, must turn on NAT on Wireless
Interface, default route is 192.168.2.254
).
4. Set Wireless parameters on Remote RB: Channel ( 1 ) and SSID
( wireless ), these parameters must same with Central RB.
5. Set the DHCP server service on the Remote RB and apply it on
Ethernet Interface.
6. The Remote RB assign IP address to PC1 and PC2
2.3 Remote Wireless Bridge-to-Central Wireless
Router
1. Set the Central RB run as a Wireless Router ( Wireless Interface IP is
192.168.1.1, Ethernet Interface IP is 192.168.2.1, must turn on NAT on
Ethernet interface, default route is 192.168.2.254
).
2. Set Wireless parameters on Central RB: Channel ( 1 ) and SSID
( wireless )
3. Set the DHCP server service on the Central RB and apply it on
Wireless Interface.
4. Set the Remote RB as a Bridge ( Bridge Interface IP is 192.168.1.2 ).
5. Set Wireless parameters on Remote RB: Channel ( 1 ) and SSID
( wireless ), these parameters must same with Central RB.
6. The Central RB assign IP address to PC1 and PC2
7. The operator can also turn off NAT behavior on Central RB and
two subnets are transparent.