5. To add another entry to the Fixed Host Mapping Pool, repeat step 1
through step 3.
6. When you have included all the entries you need, click
FINISH .
Figure 4-6 Add Fixed Host Entry
4.5
Routing
Click General Config, Routing, and then the General Configuration
–
Routing Parameter screen appears. Figure 4-7 shows the current static
route table.
Figure 4-7 General Configuration
–
Routing Parameter
Click 'Delete' or 'Modify' button to delete or modify static route entry. Input
new static route and click 'Add' button to add entry. Configure items include
Network Address, Subnet Mask and Gateway Address.
After that, click
FINISH
at the botton of this page to complete the
modification of this page.
