- Action.
choice the matched packets is
Allow
or
Deny
.
- Priority.
The priority of this firewall rule.
- Protocol.
The protocol(TCP/UDP/ICMP) of this firewall rule.
- IP
. The source/destination IP of this firewall rule.
- Port.
The single port of this firewall rule.
- Firewall Rules List.
Show all of rule which you setting
After that, click
FINISH
at the bottom of this page to complete the
modification.
4.10 Advance
Click
General Config
,
select
Advance
page
,
as shown in
Figure 4-15
- Wireless End User isolation.
You can enable this function to isolate all
the wireless end users
.
.
- VLAN Pass Through.
You can enable this function to pass-through all
kinds of VLAN packets.
- 802.1x Pass Through
. You can enable this function to pass-through all
kinds of 802.1X packets
- Link Integrity.
If Ethernet not connect Device all the wireless end users
can
’
t connect with Device.
After that, click
FINISH
at the bottom of this page to complete the
modification.
