Ethernet Interface Address
- IP Address.
Use this setting to assign or change the Ethernet interface
’
s
IP address
- Subnet Mask.
Enter an IP subnet mask to identify the sub network so the
IP address can be recognized on the WAN.
NAPT performs on which interface?
There are three interfaces. You can select one to use or select "None"
to disable it.
Default Route IP
- IP Address.
Enter the default Gateway IP Address.
DNS Server IP
- Primary DNS Server IP.
Enter the Primary Domain Name Server IP
Address.
- Secondary DNS Server IP.
Enter the Secondary Domain Name Server
IP Address.
After that, click
FINISH
at the bottom of this page to complete the
modification of this page.
4.2.6 Remote Extension Router
Wireless Interface Address
- IP Address.
Use this setting to assign or change the wireless interface
’
s
IP address.
- Subnet Mask.
Enter an IP subnet mask to identify the sub network so the
IP address can be recognized on the WLAN.
Ethernet Interface Address
- IP Address.
Use this setting to assign or change the Ethernet interface
’
s
IP address
- Subnet Mask.
Enter an IP subnet mask to identify the sub network so the
IP address can be recognized on the WAN.
NAPT performs on which interface?
There are three interfaces. You can select one to use or select "None"
to disable it.
Default Route IP
- IP Address.
Enter the default Gateway IP Address.
DNS Server IP
- Primary DNS Server IP.
Enter the Primary Domain Name Server IP
Address.
- Secondary DNS Server IP.
Enter the Secondary Domain Name Server
IP Address.
After that, click FINISH at the bottom of this page to complete the
modification of this page.
