Rayming RMLASER, Manual

Page: 26 / 42

Introduction t
。
the Main Interface
The main interface
When the system is powered on, the sc「een will show as below:
Running
progress bar
Figure 8.2-1
Coordinate
Graph layer
arameters
• Graph Display Area: To display the whole file ’
s track, and display the running t
「
ack.
• Running parameters: To display the running file ’
s file number, speed, max power etc.;
• Coordinate: To display the current coordinate of X,Y and Z axes
• Graph layer parameters: To display the layers
’
i nformation of the current file, such as max or
min power, speed etc .. When system is idle, dblclick the lay凹，then users can change the
layer
’
s parameters and the changing would be saved.
• Running Status: To display the current status of the machine, such as Idle, Run, Pause, Finish,
etc.;
• Running P「og「ess Bar: To display the progress bar of the cu「rent 「unning file;
• Wo
「
king Number: To accumulate the work number of the current file.
• File Dimension: To display the dimension of the current file;
• Net status: To display the connecting status of the Ethernet.
When work is Idle or finished, all keys can be pushed, use
「
S can select a file to run, set some
parameters, preview to a select file etc. But, when work is running or paused, some keys don
’
t
「
espond
when they are pushed.
r
- 26 -