Raymarine Verado, Installation And Commissioning Manual

Page: 52 / 72

42 SmartPilot Verado Installation and Commissioning Guide
Vessel type
Vessel type should be set when commissioning the SmartPilot.
Note: When you select the vessel type, the SmartPilot will set appropriate defaults for several other cal-
ibration settings. Refer to the table on page 49 for default values.
Drive type
The drive type setting controls how the SmartPilot drives the steering system. The drive type
should be set when commissioning the SmartPilot.
Options
DISPLACE Power-driven boats which do not plane
(Typically below 15 kts top speed)
SEMI DISPLACE Faster power-driven boats which do not plane
(Typically 15-20 kts top speed)
PLANING Planing boats with inboard engine(s) and shaft drives
(NOT boats with outdrives)
STERN DRV Boats with outdrives or outboard engines
(Verado)
WORK BOAT Commercial tugs, fishing vessels, etc.
SAIL BOAT Sailing boat
Drive Drive Type Setting
Drive Type 3
• Linear
• Rotary
Typically found on yachts
• I/O (stern)
Found on Powerboats
Drive Type 4 (Verado)
• Hydraulic reversing pump (Type 1
pump)
Used on yachts and powerboats with
hydraulic steering including Verado
D6404-1
D6405-1