Raymarine SL70RC PLUS Series, User Manual

Page: 230 / 243

Appendix E: Connecting a Raymarine Heading Sensor E-1
G-Seri
es Course
Co
m
pu
te
r
Appendix E: Connecting a Raymarine
Heading Sensor
The performance of MARPA and radar/chart overlay (color display only) on
the displays is dependent on the quality of your heading sensor.
Raymarine recommend that, for optimum MARPAand radar/chart overlay
operation, you use the Pathfinder Smart Heading System (which includes the
Gyro Plus 2 unit) or a G-series course computer, connected via NMEA, as
your source of heading data. The G-series course computer uses rate gyro
compensation.
This Appendix provides connection details for a Raymarine 150G or 400G
course computer. For information on the Pathfinder Smart Heading System
refer to the handbook supplied with the compass.
If you have a different heading sensor, or require further assistance, please
contact your authorized Raymarine dealer or Raymarine Technical Support.
G-Series Course Computer
Note: A 150 or 400 course computer coupled to the optional GyroPlus unit
will provide heading data of equal quality to the 150G or 400G course com-
puter. The method of connecting to your display is the same.
If you have a Raymarine 150G or 400G course computer we recommend that
you configure your system as follows and illustrated below:
• Connect the course computer NMEA1 output to the NMEA input and
radar/chart overlay.
• In the System Set Up Menu set Bridge NMEA Heading OFF (see Bridge
NMEA Heading on page 7-8 ).
81206_1.book Page 1 Wednesday, March 6, 2002 9:44 AM