1.
1 x Power cable 2 m (6.6 ft) (part number:
A06049
). Used to provide
12 V dc power to the SeaTalkng backbone.
2. 1 x Spur cable 1 m (3.3 ft) (part number:
A06039
). Used to connect a
device to the SeaTalkng backbone.
3.
1 x NMEA 0183 VHF stripped-end (2 wire) to SeaTalkng adapter cable
1 m (3.3 ft) (part number:
A06071
). Used to connect an NMEA 0183 VHF
radio to the SeaTalkng backbone via the NMEA 0183 VHF to SeaTalkng
converter.
4.
1 x SeaTalk to SeaTalkng converter (part number:
E22158
). Each
converter allows connection of 1 SeaTalk device and up to 2 SeaTalkng
devices.
5. 2 x Spur blanking plugs (part number:
A06032
). Used to cover unused
spur connections in 5-way blocks, T-piece connectors and SeaTalk to
SeaTalkng converter.
6. 2 x Backbone terminators (part number:
A06031
). Terminators must be
fitted to both ends of the SeaTalkng backbone.
SeaTalkng ® spur cables
SeaTalkng spur cables are required to connect devices to the SeaTalkng
backbone.
1.
SeaTalkng spur cables:
• Spur cable 0.4 m (1.3 ft) (part number:
A06038
).
• Spur cable 1 m (3.3 ft)(part number:
A06039
).
• Spur cable 3 m (9.8 ft) (part number:
A06040
).
• Spur cable 5 m (16.4 ft) (part number:
A06041
).
2. Elbow (right angled) to elbow (right angled) spur cable 0.4 m (1.3 ft) (part
number:
A06042
). Used in confined spaces where a straight spur cable
will not fit.
3.
Elbow (right angled) to straight spur cable 1 m (3.3 ft) (part number:
A06081
). Used in confined spaces where a straight spur cable will not fit.
4.
SeaTalkng to stripped-end spur cables (Connects compatible product
that do not have a SeaTalkng connector such as transducer pods):
• SeaTalkng to stripped-end spur cable 1 m (3.3 ft) (part number:
A06043
)
• SeaTalkng to stripped-end spur cable 3 m (9.8 ft) (part number:
A06044
)
5. ACU / SPX autopilot to SeaTalkng spur cable 0.3 m (1.0 ft) (part number
R12112
). Connects the course computer to the SeaTalkng backbone.
This connection can also be used to provide 12 V dc power to the
SeaTalkng backbone.
SeaTalkng ® backbone cables
SeaTalkng backbone cables are used to create or extend a SeaTalkng
backbone.
• Backbone cable 0.4 m (1.3 ft) (part number:
A06033
).
• Backbone cable 1 m (3.3 ft) (part number:
A06034
).
• Backbone cable 3 m (9.8 ft) (part number:
A06035
).
• Backbone cable 5 m (16.4 ft) (part number:
A06036
).
• Backbone cable 9 m (29.5 ft) (part number:
A06068
).
• Backbone cable 20 m (65.6 ft) (part number:
A06037
).
SeaTalkng ® power cables
SeaTalkng power cables are used to provide the SeaTalkng backbone with a
single 12 V dc power source. The power connection must include a 5 amp
inline fuse (not supplied).
64
Summary of Contents for RSW-Wired
