4.1 Parts supplied
Unpack your product carefully to prevent damage or loss of parts. Check the
box contents against the list below. Retain the packaging and documentation
for future reference.
The following parts are supplied in the box.
Item
Description
1
No.10 x 3/4" self tapping screws x 4 (for mounting the wind
transducer).
2
No.7 x 3/4" self tapping screws x 2 (for mounting the gateway).
3
40 mm (1.57 in) heat shrink tube (required to insulate ground
wire when shortening the mast cable).
4
Ring crimp terminal (required for additional ground connection
when the gateway is not mounted on a metal surface).
5
Mast cable, 30 m (98.43 ft) reel.
6
Documentation.
7
RSW-Wired Smart Wind transducer.
Item
Description
8
NMEA 2000 Wired gateway.
9
SeaTalkng ® to DeviceNet adaptor cable, 120 mm (4.72 in).
Additional components
Depending on installation the following additional components may be
required:
1.
Suitable cable for gateway ground connection.
2. M4 x 10 machine screw and M4 nut (for gateway ground connection
when installation is floating).
3.
4 x fixings suitable for wind transducer mounting (if supplied screws are
not suitable).
4.
2 x fixings suitable for gateway mounting (if supplied screws are not
suitable).
5. Soldering iron and suitable solder (required to re-tin mast cable wires if
cut).
6. Cable clips for mast cable.
17
Summary of Contents for RSW-Wired
