Raymarine RSW-Wired, Installation Instructions Manual

Page: 50 / 74

14.4 LED diagnostics
Your wired gateway has diagnostic LEDs on the front of the unit. These LEDs
are used to identify the unit’s status, and can be used for troubleshooting.
LED indication LED status and possible solutions
(Green) Powered up / Ok
• Normal operation — no user action is
required.
(Red) CAN Fault
• Check the relevant product, network
cabling and connections for signs of
damage or corrosion, and replace if
necessary.
• Consider contacting your local dealer or
Raymarine® Product Support; for contact
details, refer to:
p.53 — Raymarine
product support and servicing
LED indication LED status and possible solutions
(Red) CAN Failure
• Check the relevant product, network
cabling and connections for signs of
damage or corrosion, and replace if
necessary.
• Consider contacting your local dealer or
Raymarine® Product Support; for contact
details, refer to:
p.53 — Raymarine
product support and servicing
(Green) No wind vane connected
• Refer to the advice found within the
following section: p.38 — Connections
• Check the relevant product, network
cabling and connections for signs of
damage or corrosion, and replace if
necessary.
50