INSTRUCTIONS
w
VHF TRANSCEIVER
Iç-G88-T
Thank you for choosing this Icom product.
READ ALL INSTRUCTIONS
carefully and com-
pletely before using the transceiver.
q
ANTENNA CONNECTOR
Connect the supplied antenna.
w
LED INDICATOR
•
Lights red while transmitting.
•
Lights green while receiving a signal, or when the
squelch is open.
•
When the indicator slowly blinks green, you should
charge the battery.
•
When the indicator quickly blinks green, you must
charge the battery.
e
[PTT]
Hold down to transmit, and release to receive.
r
[UP]*/[DOWN]*
• In the VFO mode
Set the operating frequency.
• In the Memory mode
Select a Memory channel.
• In the Set mode
Select an option for the item.
• During a scan
Change the scanning direction.
t
[P0]*:
•
Push to enter or exit the VFO Set mode.
•
Hold down to enter or exit the User Set mode.
[P1]*:
•
Push to toggle the Duplex and Simplex mode.
•
Hold down for 1 second to select the Sub Audible
tone.
[P2]*:
•
Push to start or cancel a VFO or Memory scan.
•
Hold down for 1 second to set or cancel the Scan
tag to the selected channel.
[P3]*: •
Push to select the VFO mode or Memory mode.
In the VFO mode:
•
Hold down for 1 second to copy the VFO frequency to
the selected Memory channel.
In the Memory mode:
•
Hold down for 1 second to copy the selected Memory
channel frequency to the VFO.
y
SPEAKER-MICROPHONE JACK
Connect an optional speaker-microphone.
CAUTION:
The transceiver meets IP67 requirements for the
dust-tight and waterproof protection, only when the jack cover
or the optional HM-168LWP is attached.
u
[T
OP] (red button)
•
Push to open or close the squelch.
•
Hold down for 1 second to set the selected channel as the
Favourite channel.
i
[VOL]
Rotate to turn the power ON or OFF, and to adjust the audio level.
o
[ROTARY SELECT
OR] (Favourite CH Selector)
In the Memory mode, rotate to select the frequently used
channels (Favourite channels: 1~16).
!0
KEY PAD
Push to enter the operating frequency or Memory channel number.
PANEL DESCRIPTION
o
[VOL]
i
[TOP]
Speaker
u
SPEAKER-MICROPHONE
JACK
Microphone
Function Display
(LCD)
y
[P0]*, [P1]*, [P2]*, [P3]*
w
LED INDICATOR
q
ANTENNA CONNECTOR
!0
[ROTARY SELECTOR]
e
[PTT]
r
[UP]*
[DOWN]*
t
KEY PAD
y
Setting the favorite channel
You can assign the frequently used channels to the rotary selector.
Set the rotary selector to the position where the favorite channel
is assigned to.
Push [CH Up] or [CH Down], or push the 10-key pad to select
the desired channel.
Push [TOP] (red) to assign the selected channel to the rotary selector
position.
q
w
e
