Raymarine RAY50, Installation And Operation Instructions Manual

Page: 76 / 116

9.1 Hailer Fog Intercom menu
The menu options available are determined by the
device connected to your radio.
Menu name Connected devices
Hail/Fog/Int
Loud hailer and second
station connected.
Hailer/Fog Loud hailer connected, no
second station
Intercom Second station connected, no
loud hailer
Note: For simplicity the procedures in this section
all refer to the Hail/Fog/Int menu.
9.2 Loud Hailer — Ray70
The Ray70 can be connected to a Loud hailer.
In hailer mode anything spoken into the handset is
amplified and broadcast from the hailer, the message
is not transmitted over VHF channels.
When the hailer is active VHF calls cannot be sent
or received.
Using the hailer
From the Hail/Fog/Int menu: Menu > Hail/Fog/Int .
1. Select Hailer .
Hailer mode is now active
2. Press and hold the PTT button.
3. Speak your message.
4. Release the
PTT button.
5. Press the Back button to exit Hailer mode.
6. The hailer listening volume can be adjusted at
any time in Listening mode using the Volume
Control .
7. The hailer talking volume can be adjusted at
any time, with the PTT button pressed using the
Volume Control .
76
Ray50 / Ray60 / Ray70