Raymarine RAY50, Installation And Operation Instructions Manual

Page: 51 / 116

ii. if the number entered is not correct select No
– Retry .
Caution: MMSI and ATIS ID entry
You can only enter the MMSI number and
ATIS ID once!
If you store an incorrect MMSI number
or ATIS ID in your product, it will have to
be reset by an authorized
Raymarine ®
dealer.
6.12 Enabling and disabling ATIS
mode
ATIS is a European system used on some inland
waterways. ATIS must be enabled and a unique
ATIS ID entered in order to use ATIS mode.
From the Main menu.
1. Select
Set-up .
2. Select ATIS set-up .
3. Select ATIS .
4. Select On to enable ATIS mode or Off to disable
ATIS mode.
With ATIS mode enabled the radio’s region will
be fixed to the INT (international) frequency band
and the following functions are disabled:
• DSC functions
• Watch Mode
• Scan Mode
• High/low power is restricted on certain
channels
Once ATIS has been enabled an ATIS ID must be
entered.
Getting started
51