Raymarine RAY50, Installation And Operation Instructions Manual

Page: 33 / 116

4.7 SeaTalk ng® connection
The product can interface with Raymarine ® GPS
or GNSS receivers and Raymarine ® multifunction
displays using the SeaTalk ng® connection.
SeaTalk
ng
0
0
2 1
4
5
D13293-1
3
6
1. Ray50 / Ray60 / Ray70
2. Optional Raymic handset station ( Ray70 and
Ray70 only)
3. Optional 3 rd party passive speaker
4. Loud hailer ( Ray70 only)
5. GPS Receiver
6. Raymarine ® Multifunction display ( MFD )
A Raymarine ® SeaTalk ng® GPS or GNSS receiver
cannot be connected directly to the product, as GPS
and GNSS receivers are powered via the
SeaTalk ng®
backbone.
Connecting SeaTalk ng®
Before connecting to SeaTalk ng® , refer to the
SeaTalk ng® Reference Manual , to ensure that the
maximum permitted Load Equivalence Number
(LEN), for the
SeaTalk ng® backbone is not exceeded
once this product is connected.
D13218-1
1. Rotate the SeaTalk
ng®
connector’s locking collar
anti clockwise, to the unlocked position.
2. Ensure the spur cable connector is correctly
orientated.
3. Fully insert the spur cable connector into the
SeaTalk ng® connector on the unit.
4. Rotate the locking collar clockwise 2 clicks, to
the locked position.
Cables and connections 33