Disclaimer
Raymarine does not warrant that this product is error-free or that it is compatible with products
manufactured by any person or entity other than Raymarine.
Raymarine is not responsible for damages or injuries caused by your use or inability to use the
product, by the interaction of the product with products manufactured by others, or by errors in
information utilized by the product supplied by third parties.
Suppression ferrites
• Raymarine cables may be pre-fitted or supplied with suppression ferrites. These are important for
correct EMC performance. If ferrites are supplied separately to the cables (i.e. not pre-fitted), you
must fit the supplied ferrites, using the supplied instructions.
• If a ferrite has to be removed for any purpose (e.g. installation or maintenance), it must be replaced
in the original position before the product is used.
• Use only ferrites of the correct type, supplied by Raymarine or its authorized dealers.
• Where an installation requires multiple ferrites to be added to a cable, additional cable clips should
be used to prevent stress on the connectors due to the extra weight of the cable.
Connections to other equipment
Requirement for ferrites on non-Raymarine cables
If your Raymarine equipment is to be connected to other equipment using a cable not supplied by
Raymarine, a suppression ferrite MUST always be attached to the cable near the Raymarine unit.
Declaration of conformity
Raymarine UK Ltd. declares that this product is compliant with the essential requirements of EMC
directive 2004/108/EC.
The original Declaration of Conformity certificate may be viewed on the relevant product page at
Product disposal
Dispose of this product in accordance with the WEEE Directive.
The Waste Electrical and Electronic Equipment (WEEE) Directive requires the recycling of waste
electrical and electronic equipment.
Warranty registration
To register your Raymarine product ownership, please visit
and register online.
It is important that you register your product to receive full warranty benefits. Your unit package
includes a bar code label indicating the serial number of the unit. You will need this serial number
when registering your product online. You should retain the label for future reference.
IMO and SOLAS
The equipment described within this document is intended for use on leisure marine boats and
workboats NOT covered by International Maritime Organization (IMO) and Safety of Life at Sea
(SOLAS) Carriage Regulations.
10
