3. Secure the tray to the bracket using 3 of the supplied screws, in the positions indicated in the
illustration above.
4. Place the large sealing ring into the groove on the upper side of the Mounting tray.
5. Pull the SeaTalkng ® cable through the canter of the bracket and tray. Plug in the cable connector
on the underside of the unit and secure by rotating the locking collar clockwise 2 clicks.
6. Insert the unit into the mounting tray, ensuring the tabs in the Mounting tray are slotted into the
grooves around the edge of the unit.
7. Orientate the Mounting trim so that the release hole is accessible when mounted.
8. Place the Mounting trim over the unit slightly offset, and then twist the Mounting trim clockwise
until it locks into position.
49
