6.2 Autonetworking
Micronet wireless products are networked together using the
Autonetworking
procedure.
Autonetworking connects compatible wireless products, within range, to the same Micronet network.
Autonetworking — compatible Micronet displays
Autonetworking can be initiated using one of the compatible Micronet displays shown below.
Product
Description
T070
Race Master Display
T110
Multifunction wireless display
T111
Multifunction wireless dual display
T112
Multifunction wireless analogue display
T113
Multifunction wireless remote display
Performing Autonetworking
Follow the steps below to add new Micronet products to an existing system, or create a new system
from multiple boxes.
Note:
• Autonetworking should be performed before new products are mounted.
• The following procedure is NOT required when creating a new system with products that have
been supplied in a single box.
• You will need to choose a display capable of initiating Autonetworking.
• If you have an existing system then a capable display from this system should be chosen.
1. Connect products that require an external power source to a 12 V dc power supply.
2. Place all
New
products within 300 mm (11.8 in) of the display you have chosen to perform
Autonetworking.
55
