background image

When you have completed the entry of all the waypoints for a particular

route plan, just press 

 The new route plan will be stored and

the display will promptly return to the last used Display mode.

3.9.2 

 Plans

Once a route plan has been made and saved into

memory, it can be recalled to Followed or to be Edited.
Press 

 The ROUTE MODE 

screen will

appear. Press 

 

 the 

FOLLOW ROUTE 

Selector screen appears

use the numeric keys to type the number of the route

plan to 

FOLLOW.

Example 

Press 

 route plan   4.

SEQUENCE MODE 

 

  O F F

The FOLLOW ROUTE 

Setup screen appears. Once

route plans have been made, this screen permits en-
gagement of route sequence operation.

 

 

enables you to select the type of 

sequencing mode between 

AUTO

 or 

MANUAL

. The other choice turns the

route sequence mode to OFF. Press 

 

 

to high-

light the desired sequencing mode.

AUTO SEQUENCING 

mode automatically steps from one 

 to the

next when the arrival 

 point has been detected.

In MANUAL SEQUENCING 

mode, the unit sounds the arrival 

 and the

operator will manually press 

 key to step to the next leg in the

route plan when it is safe to do so.

When the Sequencing mode is decided, the next

FOLLOW ROUTE

 

step is to decide to follow the route in the Forward

direction (first to last), or to follow the route in 

SET ARRIVAL DISTANCE

verse (last to first). Just press 

 

tion 

 to advance to the next screen.

The last display shows the Arrival alarm distance that

PRESS ENT TO END

will be used to alert you as each 

 is ap-

proached. You may accept the limit by pressing 

 or enter a

limit of your choice on this screen. To enter a new arrival zone limit, type

the numbers of the desired limit distance and press 

OPERATION 3-32

Summary of Contents for GPS navigation












































































Reviews: