Press
key puts the screen into an Edit condition so you can
INSERT
or
DELETE
waypoints. Notice that two
and
(insert) appear on the screen.
To INSERT a
For example; to insert a new
between waypoints
and
and
until you see the leg containing Fr
036. If this is where you would like to
INSERT
the new waypoint, Press the
Type the new
number ( # 002) and
The
new
will now appear between
To DELETE a
To delete a
from a route plan, press
key until the leg
where the
shouid be deleted is displayed. For example; to delete
in the example above,
you see Fr
to
036. Then
EDIT and
to
DELE
TE
The
FROM
036 will disappear the route string will be joined less
036 ( deleted from route; not from
memory).
When you are finished,
press
key to end the editing session and return to the Display
mode. If you press
here (which is normally done on other
menus) you will accidently remain in the EDIT screen and continue deleting
waypoints from the route against your will.
3.9.4 Erasing Route Plans
To
ERASE
a route plan, select the Route mode with
P
r
e
s
s
the ROUTE MODE
Directory. Type in the route number to be erased
and then press the
ERASE ROUTE
The
message
P
R
ESS
ENTER"
will appear. To
ERASE
the route,
I f y o u h a v e a c h a n g e
of heart,
abandon the
E
R
ASE
request and return to the Display
mode.
3.10
One of the smallest, but most important keys on the NAV 398 is
key. This key controls access to the screens which set up the operating
parameters for the sensors, the display system, and for the navigation
calculations and readouts,
In the Menu pages you will find that the operations are very simple and
direct and the most difficult task will be to remember which menu holds the
OPERATION 334
