Designate a drive, path, and file for the data to be saved into. When the PC
Set,
press
WPT
or the
[OUTPUT ROUTE
to begin the memory transfer. The screen will show the message
UPLOADING"
willblinkonthescreenduring
the transfer process. The time to upload the data will depend on the number
of memory elements to transfer since up to 500 memories may be involved.
The UP
LOAD
IN
G
message will go out when the transfer is completed.
MEMORYDATAINPUT
When you are ready to transfer the PC files of route plans or waypoints into
the NAV unit memories, please verify that the Data Input connections in the
power cable assembly are now connected to the PC
or COM2 port.
If everythings connected correctly, on the SYSTEM STATUS DATA
menu, press the
MEMORY DATA
IN
The
screen will show the
message
"
LOADING
DATA
and
DOWNLOADING
"
will blink on the
screen during the transfer process. The time to download the data will depend
on the number of memory elements to transfer since up to 500 memories may
be involved and the transfer rate is one memory per second. The
DOWN-
LOAD
IN
G
message will go out when the transfer is completed.
SYSTEM STATUS DATA
DATA OUT .
.
MEMORY DATA OUT
q
M A I N
UNITS
l
.
NAV
MENU
.
- -
STATUS
l
OFF
BEACON
OPERATION 3-47
