4.3 Chassis ground connection
The chassis ground stud should be connected to the vessel
ground point.
D12846-1
The nut (supplied) should be used to secure a ground strap (not
supplied) to the base of the thermal camera. A ring terminal
typically sized for #6 or M3 sized stud and gauge 14 to gauge 16
wire should be used for the strap.
Note:
Ensure that the ground strap does not interfere with
mounting the camera.
4.4 External or internal connections
The cable connections can be made externally or internally.
External
As supplied, the camera cable tails extend through the base
and are connected externally:
D12847-1
Internal
Optionally you can make the cable connections internally.
D12848-1
To make internal connections, bring the cable tails up through the
base and use the supplied ethernet coupler and video connector
to make the connections internally. The ethernet coupler can be
fixed to the camera ball assembly using the zip ties (supplied).
Cables and connections
