RaycoWylie i4507, Instruction Manual

Page: 65 / 78

65 i4507 Offshore Lattice Boom Crane Instruction Manual
55M4507OBE00-B
During start up and other operation processes, the
i4507 system analyses all interactions between internal
peripherals (memories, controllers, extension cards, etc.)
and external peripherals (various interfaces connected to
the Canbus network). An error message will appear on the
main screen if an error is detected.
If you have any questions or need technical assistance, please contact our technical
service department at RaycoWylie .
5.7 Error messages
5.7.1 Internal Peripherals
Error Messages Execution process Cause of error
• Calibration’s data memory is
defective, or
Operator’s data memory is
defective, or
Load chart data memory is
defective, or
Data Logger memory is
defective
When starting system, there
is a verification (writing/
reading) of the whole flash
memory on the engine board
There is a problem with
the flash memory on the
engine board located in the
i4507 display
Contact the technical service
department at RaycoWylie
.
RAM memory is defective
When starting system, there
is a verification (writing/
reading) of the RAM
memory on the engine
Board .
There is a problem with
the RAM memory on the
engine board located in the
display
Contact the technical service
department at RaycoWylie
Clock is defective The system regularly verifies
if the seconds are moving. If
time does not change, then
there is a problem
1) Verify if the battery on the
mother board in the display is
well inserted.
2) The clock chip is defective
on the mother board
Low battery The system detected that
the lithium battery is low.
Because of this, the clock
may stop or lose precision.
The lithium battery is out.
Replace the battery on the
mother board
SYSTEM
ERROR
INDICATOR