RaycoWylie i4507, Instruction Manual

Page: 60 / 78

55M4507OBE00-B
60
i4507 Offshore Lattice Boom Crane
Instruction Manual
5.1 Diagnostic Mode (cont’d)
This is the typical displayed information in the diagnostic menu:
Some applications have more than one angle or length sensor.
The first angle sensor displayed is the one installed closer to the main boom base.
For sensors, the second column gives the value of the parameter calculated by the
interface connected to the CANBus network and the third column gives the state
of the sensor connection to the CANBus network.
Concerning the A2B, it is its activation status that is displayed.
If the interface is not a sensor, such as the relay interface, and therefore does not
return a specific value, no value is displayed in the second column, however, the
state of connection to the CanBus network is given in the third column
Value
transmitted
by sensor
State of the
connection with
sensor
This screen may be different on your i4507. The information
seen here is dependent on sensors installed on your machine.