55M4500CCE00 REV A
3
CALIBRATION
Step #11: “Zero sensor/Side of boom angle” angle sensor calibration
Address selection dip switch:
Every angle sensor installed has its own dedicated address. These switches are factory
set prior to dispatch and will not normally require changing. Please refer to the wiring
diagram to see the address dip switch setting for each angle sensor interface.
Angle Sensor Side of Boom:
1)
Use
“
”
or
“
”
to choose “select sensors” and press
“
”
.
2)
Use
“
”
or
“
”
to choose the relevant angle sensor and press the
“
”
.
3)
Use
“
”
or
“
”
to choose “span sensor or side of boom angle” and press
“
”.
Summary of Contents for i4500
Page 2: ...55M4500CCE00 REV A...
