4. Change the frequency of the tuner’s standard pitch.
Turn the VALUE knob to set the standard pitch of middle A from 435 445 Hz (Default: 440 Hz).
5. Return to play mode
Press either
[▼]/[▲]
footswitch.
In play mode, press and hold both
[▼]/[▲]
footswitches until “LOOPER” appears on the screen.
You can use the looper function to record some phrases for practicing, jamming, etc. The
maximum recording time of the looper is 30 seconds.
1. Activate the looper
Looper Function
18
~
Summary of Contents for MP-10
