SBGuidance Side-Shift I Version 1.1 I CAN
Pag 27/
30
I SBG-Side-Shift-IM-EN-V1.0
3.5. Configurator set-up
Add an machine-profile to the loader screen
and name it appropriately.
Refer to the SBGuidance Auto CAN set-
up and configuration manual for further
information on how to install SBGuidance
and make machine profiles.
Open SBGuidance Configurator for this
machine-profile. Under Machine settings in the
SBGuidance Configurator, set up and configure
the system and guidance type. Select system
type “
CAN
” and Guidance type “
SBGuidance
Side-Shift
”. For the Orientation, select
“
DynamIQ
”. If Side-Shift steering is used in a
Twin-steering system, settings need to be set at
AUX
. If only Side-Shift steering is used settings
need to be set at
Main
.
No parameters are required on the tab Side-
Shift.
On the tab Machines, enter offset A (antenna
height).
3.6. Calibrating DynamIQ
Calibrate the DynamIQ using the two-point
calibration method. Calibration (Figure 28) can
be performed in SBGuidance under INFO >
GPS > Orientation > tab page Implement.
Refer to the SBGuidance Auto CAN set-
up and configuration manual for further
information on how to install and
calibrate the DynamIQ.
Figure 28 DynamIQ two-point calibration
