SBGuidance Side-Shift I Version 1.1 I CAN
Pag 15/
30
I SBG-Side-Shift-IM-EN-V1.0
2.5.1. Mounting of the angle sensor in
the bracket
Use the following description to mount the
angle sensor in the bracket (Figure 6):
1. The sensor consists of two parts, both
need to be mounted with M5 bolts. The
smallest piece (little disc) needs to be
m
ounted to the “arm”-bracket and the
biggest piece (sensor housing) needs
to be mounted to the “U”-shaped
bracket.
2. The sensor bracket consists of two
parts. Mount those parts in the following
order: M6 bolt
, washer, “U”-shaped
bracket, fender washer, “arm”-bracket,
washer, split lock washer and nylon
insert lock nut.
3. Fasten the lock nut at its fullest then
loosen a little.
Before mounting check if the sensor disc
can move freely in the sensor housing
when turning the sensor arm.
2.5.2. Side-Shift steering
When using side-shift steering the angle sensor
needs to be connected to the side-shift cylinder.
At the end of the cylinder a hole with internal
thread is present for easy mounting of the angle
sensor connection.
The installation needs to be done in such a way
that the position of the angle sensor is in line
with the side-shift cylinder and the threaded rod
is an extension between the cylinder and the
angle sensor arm (Figure 7).
Figure 6 overview of angle sensor bracket
Figure 7 Mounting angle sensor Side-shift steering
top view
