Pag 14/
30
I SBG-Side-Shift-IM-EN-V1.1
SBGuidance Side-Shift I Version 1.1 I CAN
Load Sense
Connect the pressure line to
P
, the return line to
T
and the sensor line to
LS
on the manifold.
Use the Load Sense (L.S.) connections of the
tractor.
Open Center
Connect the pressure line to
P
and the return
line to
T
on the manifold. Use the external
hydraulic valve of the tractor.
The Side-Shift cylinder can also be
manually steered by pressing the pin on
the proportional valve (
2.4. Mounting of the Steering Controller
The Steering Controller (STU
– Side-Shift
steering) can be mounted to the manifold with
the aid of an STU bracket (Figure 3). Mounting
the controller to the frame of the implement is
also an option.
It is recommended to mount the STU flat or with
the connectors directed downwards, to prevent
water collecting on the connectors.
2.5. Mounting of the angle sensor
The angle sensor measures the exact position
of the Side-Shift cylinder or drawbar. When
using Side-Shift steering, an angle sensor is
needed to show the current position of the
cylinder in the software and to use the “Auto-
Center” functionality.
In a Side-Shift steering kit an angle
sensor is delivered in an angle sensor
bracket (Figure 5) by standard.
Figure 5 Angle senor mounted in bracket
Figure 4 Manual control hydraulic valve
