30
4.2.1.2 Fault
The suppressed fault events are viewed by selecting
the number 2 from the suppressed events screen. The
display screen as shown below.
x
– n
th
no. of events;
y
– Total no. of events.
4.2.2 Program
NOTE:
Access to programming is possible only by Admin password
(Default Password – 56789).
By selecting the number 2 from the menu screen, system enters into
the program mode. The Repeater settings and panel settings
configurations are done in this program mode. After entering the
program mode, screen will be as below.
1. Repeater Settings
2. Panel Settings
4.2.2.1.
Repeater Settings:
By selecting the number 1 from above the program screen, system
enters into Repeater setting Mode shows Change password and
Repeater address. By selecting the number 1 from the setting below
screen, the change password is used to reset the new password of
Repeater Panel.
Fault [ x/y ]
Type of Fault
